Controlling Travel; Application Range For The Lawnmower; Mowing With The Grass Catcher; Mowing With Rear Discharge - Fieldmann FZR 4611 B User Manual

EN 10 Controlling and operating the lawnmower
Caution! A small amount of smoke may be emitted when the engine is started up for the fi rst time as the
protective layers in the engine are burnt off. This is completely normal and does not constitute a problem.

CONTROLLING TRAVEL

The travel is controlled using the travel lever (Fig. 5 – point 1). When the lever is pulled to the handle, the
lawnmower will start moving.
To stop, release the lever. This lawnmower has one constant speed.
APPLICATION RANGE FOR THE PETROL LAWNMOWER
Mowing with collection of grass clippings in a grass catcher
Mowing with rear discharge of grass clippings
Mulching - mowing with loose placement of grass clippings on the lawn

MOWING WITH THE GRASS CATCHER

When the grass catcher is installed, grass clippings are discharged into the grass catcher

MOWING WITH REAR DISCHARGE

Without the grass catcher installed, the grass catcher cover serves as a defl ector that directs the movement of
the grass clippings towards the ground. A row of grass clippings is thereby formed behind the lawnmower

MULCHING

Caution! Attach and remove the mulching plug only with the engine turned off.
Caution! Use only original mulching accessories when mulching.
1. Remove the grass catcher and hold the plastic grass
catcher cover with your hand (Fig. 6 – point 1)
2. Install the mulching plug into the discharge chute
(Fig. 6 – point 2) and make sure that the plug is seated
fi rmly.
IMPORTANT INFORMATION: Do not mulch tall
grass all at once, this will prevent overloading the
lawnmower mechanism and the engine.
Fig. 5
Fig. 6
FZR 4611 B