Changing The Input Display - Onkyo 29344937 Instruction Manual

First Time Setup—Continued

Changing the Input Display

If you connect an u-capable Onkyo RI Dock to the
TV/TAPE IN, CBL/SAT IN or VCR/DVR IN jacks, for
u to work properly, you must change this setting.
This setting can only be changed on the AV receiver.
VCR/DVR CBL/SAT TV/TAPE
1 Press the [TV/TAPE], [CBL/SAT]
or [VCR/DVR] input selector
button so that "TV/TAPE",
"CBL/SAT" or "VCR/DVR"
appears on the display.
or or
or
2
Press and hold down the
[TV/TAPE], [CBL/SAT] or
[VCR/DVR] input selector button
(about 3 seconds) to change the
setting.
Repeat this step to select DOCK.
or or
For the TV/TAPE input selector, the
setting changes in this order:
TV/TAPE
DOCK
For the CBL/SAT input selector, the
or
setting changes in this order:
CBL/SAT
For the VCR/DVR input selector, the
setting changes in this order:
VCR/DVR
See "Controlling Other Components"
on pages 90, 91
Note:
DOCK can be selected for the TV/TAPE, CBL/SAT or
VCR/DVR input selector, but not at the same time.
→ →
MD CDR
→
↔
DOCK
↔
DOCK
45