Onkyo 29344937 Instruction Manual page 83

Zone 2—Continued
Adjusting the Volume of Zones
On the remote controller, press
Remote
the [ZONE 2] button, and then
controller
use the VOL [q]/[w] button.
On the AV receiver, press the
AV receiver
[ZONE 2] button (the ZONE 2
indicator and Zone 2 selector on
the display flashes) and then use
the [–]/[+] buttons within 8
seconds.
Muting Zones
On the remote controller, press
Remote
the [ZONE 2] button, and then
controller
press the [MUTING] button.
To unmute a zone, on the remote
controller, press the [ZONE 2]
button, and then press the
[MUTING] button again.
Note:
Zones can also be unmuted by adjusting the volume.
83