Speaker Package; Subwoofer (Skw-770) - Onkyo 29344937 Instruction Manual

Speaker Package

Subwoofer (SKW-770)

For detailed information, see the pages in parentheses.
■ Front
a
■ Rear
b
Asian models
To AC outlet
14
POWER
ON
SKW-770
OFF
c d
a STANDBY/ON indicator
Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-770
automatically turns on when an input signal is
detected in Standby mode. When there's no input
signal for a while, the SKW-770 automatically
enters Standby mode.
b POWER switch (Asian models)
Press this switch to the ON position to turn on the
power. Press it to the OFF position to turn off the
power.
c OUTPUT LEVEL control (49)
This control is used to adjust the volume of the
subwoofer.
d LINE INPUT (20)
This RCA input should be connected to the
subwoofer pre out on the AV receiver with supplied
RCA cable.
Note:
The Auto Standby function turns the subwoofer on when
the input signal exceeds a certain level. If the Auto
Standby function does not work reliably, try slightly
increasing or decreasing the subwoofer output level on
the AV receiver (page 70).