Interior Lights; Plasma Cluster - Viking VDSC367 Service Notebook

Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit, unless
test procedures require power to be connected. Ensure all ground wires are connected before certifying unit as
repaired and/or operational.

Interior Lights

The unit uses two lights, one in the fresh
food section and one in the freezer section,
to provide lighting for the cabinet.
1. To access the light bulb, remove shelves.
2. Remove light cover. The fresh food light
cover is removed by pressing up on the
bottom of cover while gently pulling out
on the top of the cover to release the
cover tab from the mounting plate. The
freezer light cover is removed by pushing
down on the top of the light cover while
gently pulling out on the bottom of the
cover to release the cover tab from the
mounting plate.
3. Remove the three securing screws to
access the socket.
20
! WARNING
4. Remove the light assembly and replace/
repair the socket.
5. Reverse procedure to reinstall.

Plasma Cluster™

The Plasma Cluster™ ion air purifier uses
ions to eliminate airborne bacteria, mold
spores, and food odors without having to be
replaced.
1. To access the plasma cluster, remove
air cover (see fresh food fan procedure,
Page 19).
2. With cover removed, remove the double
sided tape securing the plasma cluster
to the air cover, disconnect wiring, and
repair/replace plasma cluster.
3. Reverse procedure to reinstall.
Plasma Cluster
©2012 Viking Preferred Service