120-9570
1. Warning—stay away from moving parts, keep all guards
and shields in place.
121–1449
1. Warning—do not park on slopes unless the wheels are
chocked or blocked.
Setup
1
Installing the Handle
No Parts Required
Procedure
1. Remove the 2 bolts from the machine frame in the
location shown in Figure 3.
Note: Save the bolts for securing the handle to the
machine in step 3.
1. Bolt (2)
2. Rotate the handle rearward into the operating position.
3. Secure the handle to the machine with the bolts that
you removed in step 1.
4. Tighten the nut on each of the handle support brackets
until it is snug.
6
2
1
G019802
Figure 3
2. Nut on handle support
bracket (2)