1
Figure 13
Front cutting-height lever
1. Squeeze the lever to disengage it.
g019645
Figure 14
Rear cutting-height lever
Starting the Engine
1. Connect the wire to the spark plug (Figure 5).
2. Open the fuel shutoff valve (Figure 15).
Note: When the fuel shutoff valve is open, the lever is
parallel with the fuel line.
g019653
g019650
1. Fuel shutoff valve
3. Move the throttle control to the Choke position
(Figure 7).
4. Pull the starter handle lightly until you feel resistance,
then pull it sharply.
5. Move the throttle control lever to the Fast position
when the engine starts (Figure 6).
Note: If the engine fails to start after 3 pulls, repeat
steps 3 through 5.
Stopping the Engine
1. Move the throttle control to the Off position and wait
for all moving parts to stop.
2. Close the fuel shutoff valve and disconnect the wire
from the spark plug if you do not use the machine or
leave it unattended.
11
1
Figure 15
1
g019651