Maintenance; Recommended Maintenance Schedule(S) - Toro 30071 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Before storage
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition and disconnect the spark plug wires from the spark plugs before you do
any maintenance. Set the wires aside so that they do not accidentally contact the spark plugs.
Maintenance Procedure
• Change the engine oil.
• Check the hydraulic fluid.
• Change the hydraulic filter.
• Check the safety interlock system.
• Grease the front caster pivot bearing.
• Check the engine oil level.
• Clean the air intake screen.
• Check the brakes.
• Inspect the blades.
• Clean the mower deck.
• Clean foam air cleaner element.
• Check the hydraulic fluid.
• Grease the PTO belt idler.
• Check the paper air cleaner element.
• Check the tire pressure. or monthly, whichever occurs first.
• Inspect the belts for cracks and wear.
• Change the engine oil.
• Check the spark plugs.
• Adjust the electric clutch.
• Check the hydraulic lines.
• Replace the paper air cleaner element.
• Change the oil filter.
• Replace the fuel filter. or yearly, whichever occurs first.
• Change the hydraulic fluid.
• Change the hydraulic filter.
• Grease the front wheel bearings (more often in dirty or dusty conditions).
• Paint chipped surfaces.
• Perform all maintenance procedures listed above before storage.
19