Hdmi And Progressive Settings; Setting The Hdmi; Selecting Progressive Or Interlaced - Onkyo DV DV-SP506 Instruction Manual

HDMI and Progressive Settings

RESOLUTION
HDMI

Setting the HDMI

This section explains how to turn on the HDMI OUT and
change the video resolution when your TV or projector
is connected to the HDMI OUT.
See pages 19–27 for HDMI connection information.
1
Press the DV-SP506's [HDMI] but-
ton to turn on HDMI.
2
Press the [RESOLUTION] button
repeatedly to change the HDMI
resolution.
The first button press displays the cur-
rent resolution onscreen. Press the but-
ton again while the resolution is
Remote
controller
displayed to change the setting.
The DV-SP506 supports the following resolutions:
Auto (default):
The resolution is automatically scaled to the preferred
resolution of the TV connected to the HDMI OUT.
If Auto is selected but the DV-SP506 doesn't support the
resolution preferred by the TV, the resolution will be
480p/576p.
×
480i (720 480i/576i)
The setting displayed depends on the country in which
you purchased the DV-SP506 (720
×
576i 50Hz).
×
480p (720 480p/576p)
The setting displayed depends on the country in which
you purchased the DV-SP506 (720
×
576p 50Hz).
46
TOP MENU MENU
RETURN SETUP
RESOLUTION
×
480i 60Hz or 720
×
480p 60Hz or 720
×
720p 1280 720p 50/60Hz
×
1080i 1920 1080i 50/60Hz
×
1080p 1920 1080p 50/60Hz
Tip:
• These settings can also be changed by using the
HDMI Output and HD Resolution settings on the
onscreen setup menus (see pages 49, 50).
Notes:
• Be sure to choose a resolution that's supported by your
TV. If you select a resolution that your TV doesn't
support, there will be no picture.
• While an SACD or DVD-Audio disc is loaded, the
HDMI On/Off and resolution settings cannot be
changed. Eject the disc first if you need to change one
of these settings.
• When the HDMI OUT is on, interlaced video is output
by the composite video, S-Video, and component
video outputs.

Selecting Progressive or Interlaced

If your TV's component video input supports progres-
sive video, you can set the DV-SP506 to progressive and
enjoy progressive video on your TV. If your TV's com-
ponent video input doesn't support progressive video, set
the DV-SP506 to Interlace.
1 Press the DV-SP506's [HDMI] but-
ton to turn off HDMI.
2
Use the [RESOLUTION] button to
select progressive or interlaced.
The first button press displays the cur-
rent setting onscreen. Press the button
again while the setting is displayed to
change the setting.
Remote
controller
The PROGRESSIVE indicator appears
on the display when progressive is
selected. (If the HDMI OUT is on, the
indicator will not appear.)