Connecting the DV-SP506—Continued
Video Settings
The following table shows how the video settings affect the video outputs.
Setting
Video output
HDMI
Component
S-Video
Composite
AV CONNECTOR
(European model only)
*1 If your TV doesn't support the HD Resolution settings of 480i/576i, 720p, 1080i, and 1080p, you'll get no picture.
*2 If your TV doesn't support progressive scanning, you'll get no picture.
*3 With the SCART Output Setting, you can choose RGB, S-Video, or composite video for the AV CONNECTOR output. When
RGB is selected, nothing will be output by the component video output (see page 51).
Note:
• When the Progressive Setting is set to Progressive, no video will be output by any outputs other than the component
video output. To reset the setting, press and hold down the Previous [
button.
On
HD Resolution setting (page 46)
Auto
480i/576i
480p/576p
(default)
✓
✓
*1
✓
✓
✓
✓
✓
✓
✓
✓
*3
HDMI Output Setting (page 49)
720p, 1080i,
1080p
✓
✓
*1
✓
✓
✓
✓
✓
✓
✓
✓
] button, then press the [ON/STANDBY]
Off
Progressive Setting (page 46)
Progressive
Interlaced
No output
No output
✓
✓
*2
✓
No output
✓
No output
✓
No output
27