Front & Rear Panels; Front Panel - Onkyo DV DV-SP506 Instruction Manual

Front & Rear Panels

Front Panel

For detailed information, refer to the pages in brackets.
1 2
A
ON/STANDBY button [29]
This button is used to set the DV-SP506 to On or
Standby.
Don't turn on the power until you've completed,
and double checked all connections.
B
STANDBY indicator [29]
This indicator lights up when the DV-SP506 is in
Standby.
C
RESOLUTION button [46]
This button is used to select the video resolution for
the HDMI output. When the HDMI Output Setting
is set to Off, it sets the component video output to
progressive or interlaced.
D
HDMI button [46]
This button is used to turn HDMI on or off.
E
HDMI indicator [46]
This indicator lights up when a HDMI signal is
being output.
F
Disc tray [31]
Discs are loaded here.
G
TOP MENU button [34, 36]
With DVD discs, this button displays the main
menu. With a JPEG disc, it displays thumbnails of
the images. With a Video CD, it turns PBC on or off.
H
Cursor /
The four cursor buttons located around the central
[ENTER] button are used to navigate DVD-Video
menus and the onscreen setup menus.
The central [ENTER] button is used to start play-
back of the selected title, chapter, or track and to
confirm settings.
I
MENU button [34, 36]
This button is used to display a menu on a DVD or
to open the Disc Navigator when using a JPEG disc.
12
3 4 5
S R Q
/ / & ENTER buttons [48]
6 7 8 9
TOP MENU MENU
RETURN SETUP
P O
J
(open/close) button [31]
This button is used to open and close the disc tray.
K
(pause) button [31, 33]
This button is used to pause playback.
L
(stop) button [32]
This button is used to stop playback.
M
(play) button [31]
This button is used to start playback.
N
Previous/Next
The Previous button is used to select the previous
chapter or track. During playback it selects the
beginning of the current track.
The Next button is used to select the next chapter or
track.
O
SETUP button [48]
This button is used to open and close the onscreen
setup menus.
P
RETURN button
This button is used to exit the onscreen setup.
Q
Remote control sensor [11]
This sensor receives control signals from the remote
controller.
R
DISPLAY button [45]
This button is used to display information about the
title, chapter, or track, including the elapsed time,
remaining time, total time, and so on. Press it
repeatedly to display more information.
S
DIMMER button [29]
This button is used to adjust the display brightness.
normal
J K L M
N
/ buttons [32]
dim dimmer