Table of Contents
Advertisement
International Harvester
Texaco
Shell
Union OIl
Chevron
BP Oil
Boron OIl
Exxon
Conoco
Kendall
Phillips
Note: The fluids within this group are interchangeable.
Group 2 Hydraulic Fluid (Biodegradable):
ISO VG 32/46 anti-wear hydraulic fluid
Mobil
Note: The fluid in this group is not compatible with the fluids
in group 1.
IMPORTANT: These hydraulic fluids are specified to allow
optimal operation of the machine in a wide range of tempera-
tures encountered. The group 1 fluids are a multi-viscosity
hydraulic fluids which allows operation at lower temperatures
without the increased viscosity, which is associated with straight
viscosity fluids.
Note: When changing from one type of hydraulic fluid to the other,
be certain to remove all the old fluid from the system, because
some brands of one type are not completely compatible with
some brands of the other type of hydraulic fluid.
IMPORTANT: Use only types of hydraulic fluids specified.
Other fluids could cause system damage.
Note: A red dye additive for the hydraulic system fluid is available
in 20 ml bottles. One bottle is sufficient for 15–23 l. of
hydraulic fluid. Order Part No. 44-2500 from your Authorized
Toro Distributor
1.
Position the machine on a level surface, lower the cutting units
and stop the engine.
2.
Clean the area around the filler neck and the cap of the
hydraulic tank. Remove the cap from the filler neck.
3.
Remove the dipstick from the filler neck and wipe it with a
clean cloth. Insert the dipstick into the filler neck; then remove
it and check the level of fluid. Fluid level should be within 0.6
cm of the mark on the dipstick.
12
Hy-Tran
TDH
Donax TD
Hydraulic/Tractor Fluid
Tractor Hydraulic Fluid
BP HYD TF
Eldoran UTH
Torque Fluid
Power-Tran 3
Hyken 052
HG Fluid
EAL 224 H
Advertisement
Table of Contents
