Adjusting The Mowing Speed; Brake Maintenance; Adjusting The Brakes - Toro 04510 Operator's Manual

Adjusting the Mowing Speed

The mow speed is set to 3.8 mph at the factory.
The forward moving speed can be adjusted from 0 to 8 km/h
(0 to 5 mph).
1. Loosen the jam nut on the trunnion bolt
2. Loosen the nut securing the lock and mow brackets
on the pedal pivot.
3
Figure 50
1. Jam nut
2. Nut
3. Rotate the trunnion bolt clockwise to reduce the
mowing speed and counterclockwise to increase the
mowing speed.
4. Tighten the jam nut on the trunnion bolt and the nut
on the pedal pivot to lock the adjustment
Check the adjustment and adjust as required.
(Figure 50).
2
1
g014625
3. Trunnion bolt
(Figure 50).

Brake Maintenance

Adjusting the Brakes

If the brake fails to hold the machine while parked, you can
adjust the brakes using the bulkhead fitting near the brake
drum; contact your Authorized Service Distributor or refer to
the Service Manual for more information.
Note: Burnish the brakes annually; refer to
Machine (page 23).
37
Breaking-in the