Adding Rear Weight; Installing Eu Decals; Product Overview; Controls - Toro 04510 Operator's Manual

8

Adding Rear Weight

Parts needed for this procedure:
1 Weight kit, 119–7129 (purchase separately)
Procedure
This unit complies with the ANSI B71.4-2004 and EN
ISO 5395:2013 Standards when equipped with weight kit
119-7129.
9

Installing EU Decals

Parts needed for this procedure:
1 Warning decal 117-9537
Procedure
If this machine will be used in the EU, affix the warning decal
117-9537 over English warning decal 117-9536.

Product Overview

4
2
3
1
g014674
1. Engine
2. Roll bar
3. Control panel
4. Seat

Controls

Traction Pedal
The traction pedal (Figure
machine move forward, to move it backward, and to stop the
machine. Press the top of the pedal to move forward and the
bottom of the pedal to move backward or to assist in stopping
when moving forward. Also, allow the pedal to move to the
neutral position to stop the machine. For operator comfort,
do not rest the heel of your foot on reverse when operating
forward (Figure 17).
17
5
6
7
Figure 15
5. Steering wheel
6. Traction pedal
7. Footrest
8. Cutting units
16) has 3 functions: to make the
8