Throttle Control - Toro 04510 Operator's Manual

1
Figure 16
1. Traction pedal—forward
2. Traction pedal—reverse
Figure 17
Ground speeds are as follows:
•
3.2 to 8 km/h (2 to 5 mph) forward mowing speed
•
16 km/h (10 mph) maximum transport speed
•
4.0 km/h (2.5 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal (Figure 16) and raise or lower the steering
arm for operator comfort, then, release the pedal to lock the
arm in place.

Throttle Control

The throttle control (Figure
to control the speed of the engine. Moving the throttle
control toward the Fast position increases the engine speed;
moving the throttle control toward Slow will decrease the
engine speed.
Note: The engine cannot be stopped by the use of the
throttle control.
2
g014603
3. Steering arm locking pedal
18) gives the operator the ability
5
3
6
7
8
1. Ignition switch
2. Choke
3. Functional-control lever
4. Raise/Lower Mow Control
Choke
To start a cold engine, close the carburetor choke by pulling
the choke control
After the engine starts, regulate the choke to keep the engine
running smoothly. As soon as possible, open the choke by
pushing it in to the Open position. A warm engine requires
little or no choking.
Raise/Lower Mow Control
Moving the control
lowers the cutting units and starts the reels. Pull back on the
control to stop the reels and raise the cutting units. During
operation the reels can be stopped by pulling back on the
control momentarily and releasing it. Start the reels by
moving the control forward.
Functional Control Lever
The functional control lever
selections plus a Neutral position. It is permissible to shift
from mow to transport or transport to mow (not to neutral)
while the machine is in motion. No damage will result.
•
Rear Position—neutral and backlapping
•
Middle Position—used for mowing operation
•
Front Position—used for transport operation
18
4
Figure 18
5. Throttle control
6. Service-indicator light
7. Engine-oil-pressure light
8. Leak-indicator light
(Figure 18) out to the Closed position.
(Figure 18) forward during operation
(Figure 18) provides 2 traction
3
2
1
g014771