Cleaning; Storage; Disposal; Spare Part Order - Zipper Mowers ZI-STE2000IV Operation Manual

Hide thumbs Also See for ZI-STE2000IV:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32
3. Discharge the machine oil.
4. Dismantle the spark plug, and pour a big spoon of clean machine oil into the engine. Make the
engine rotate for several circles to make the oil evenly distribute. Install the spark plug again.
5. Pull the starting hold (Fig. AD) slowly until you feel the resistance. At this time, the piston
reaches the compressed stroke, and both the entering and the discharging valve are closed. To
store the generator under such condition will help to prevent the inside of the machine rusting.

12.2.1 Cleaning

Clean the machine from mud and grass after every operation:
Protect non coated metal parts against corrosion (e.g. with oil or WD40)!

12.2.2 Storage

If the generator is stored for longer than 30 days:
 Wait until the engine cools down sufficiently.
 Allow the fuel from the tank into a suitable container and store the drained fuel in a suitable
container.
 Clean and dry machine
 Store in a dry, out of reach of children place, well wrapped (cut protection)
 Cover the machine well and store it in a dry and clean place.

12.2.3 Disposal

Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. When you buy at your local
dealer for a replacement unit, the latter is obliged to exchange your old.

13 SPARE PART ORDER

With original ZIPPER spare parts you use parts that are attuned to each other and shorten the
installation time and elongate your machines lifespan.
The installation of non-original parts renders warranty null and void.
Exempted is the replacement of the spark plug if carried out by a specialist.
You find the order address in the preface of this operation manual.
ZIPPER MASCHINEN GmbH
ZI-STE2000IV
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
I M P O R T A N T
www.Zipper-Maschinen.at
N O T I C E
SPARE PART ORDER
42

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

912003923913 2

Table of Contents