OSEE BCM-170 Series User Manual page 15

1 Main menu NAME
The main menu item which is selected will be display.
2 Menu items
l Press MENU key, the menu will display in the screen.
l Press ENTER key to enter the item selected and press the ENTER ket again, the setup will
be saved.
l Press MENU key to exit the menu and don't save the setup.
3 Sub-menu items
l Press UP/DOWN to switch the items.
l Press MENU key to backspace the main menu items.
l Press ENTER key to enter the sub-menu items which is selected.
Note:
1. After the menu is enabled, the menu will refresh the current contents of the menu if the signal
changes,
2. Press MENU key and if there is no operation within 60s, the menu will automatically disappear.
3. The main menu displays in the upper left corner of the screen with the translucent blue background
and white font.
4. The background of selected menu item color changes to yellow.
5. Items can not be adjusted in the submenu would be gray.
Details are as follows:
MAIN MENU SUB-MENU
STATUS Status messages
SDI1
SDI2
LINE1
INPUT
LINE2
SETUP(G)
HDMI
NTSC SETUP
NTSC PHASE
MARKER
AREA MARKER
CENTER
MARKER
MARKER (G)
*1
SAFETY
MARKER
MARKER LEVEL
MARKER MAT
Americas, Ltd. BCM-170 Series LCD Monitor
ITEMS
ON, OFF
ON, OFF
ON, OFF
CVBS, Y/C, YPbPr, OFF
Note: The BCM215 monitor support only.
HDMI, DVI-D, OFF
0, 7.5
*2
-50-0-50
OFF, ON
Note: If you selected NATIVE, the MARKER will be disabled.
OFF, 4:3, 15:9, 14:9, 13:9, 1.85:1, 2.35:1( in 16:9mode);
OFF, 16:9
OFF, ON
OFF, 80%, 85%, 88%, 90%, 93%, 95%, 100%
1, 2, 3
1: amount to 50% white level
2: amount to 75% white level
3: amount to 100% white level
OFF, HALF, BLACK
11
User Manual