Sound Pressure; Sound Power; Vibration (Model 04036); Vibration (Model 04037) - Toro 04036 Operator's Manual

– Reduce speed when making sharp turns. Avoid
sudden stops and starts.
– When near or crossing roads, always yield the
right-of-way.
– Reduce engine speed and apply the service brake
when going downhill to keep forward speed slow
and to maintain control of the machine.
• Do not touch the engine, muffler, or exhaust pipe
while the engine is running or soon after it has
stopped because these areas could be hot enough
to cause burns.
• When a person or pet appears unexpectedly in or
near the mowing area, stop mowing. Careless
operation, combined with terrain angles, ricochets,
or improperly positioned guards can lead to thrown
object injuries. Do not resume mowing until the
area is cleared.
Maintenance and Storage
• Check all fuel lines for tightness and wear on a
regular basis. Tighten or repair them as needed.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting unit
and any moving parts. Keep everyone away.
• To ensure safety and accuracy, have an Authorized
Toro Distributor check the maximum engine speed
with a tachometer. Maximum governed engine speed
should be 3600 ±100 RPM.
• If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
• Use only Toro approved attachments and
replacement parts. The warranty may be voided if
used with unapproved attachments.

Sound Pressure

This unit has a maximum sound pressure level at the
operators ear of 84 dBA, based on measurements of
identical machines per EN 836 and ISO 11201.

Sound Power

This unit has a guaranteed sound power level of 95
dBA, based on measurements of identical machines per
ISO11094.

Vibration (Model 04036)

This unit does not exceed a hand/arm vibration level of
4.50 m/s 2 , based on measurements of identical machines
per EN 1033 and EN 836.

Vibration (Model 04037)

This unit does not exceed a hand/arm vibration level of
4.50 m/s 2 , based on measurements of identical machines
per EN 1033 and EN 836.
6