Chassis Maintenance; Adjusting The Cargo-Box Latches; Cleaning; Washing The Vehicle - Toro 07359 Operator's Manual

Hide thumbs Also See for 07359:
Table of Contents

Advertisement

Chassis Maintenance

Adjusting the Cargo-box
Latches
If the cargo-box latch is out of adjustment, the cargo box
vibrates up and down as you drive the vehicle. You can adjust
the latch posts to make the latches hold the cargo box snugly
to the chassis.
1. Loosen the locknut on the end of the latch post
57).
Figure 57
1. Latch
2. Locknut
2. Rotate the latch post clockwise until it is snug against
the hook portion of the latch
3. Torque the locknut to 19.7 to 25.4 N-m (175 to 225
in-lb).
4. Repeat this steps
1
side of the vehicle.
3. Latch post
(Figure
57).
through
3
for the latch on the other

Cleaning

Washing the Vehicle

The vehicle should be washed as needed. Use water alone or
with a mild detergent. A rag may be used, however the hood
will loose some of its luster.
Important: Pressurized water is not recommended
when washing the machine. It may damage the electrical
system, loosen important decals, or wash away necessary
(Figure
grease at friction points. Avoid excessive use of water,
especially near the control panel, engine, and battery.
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

07359tcWorkman mdx-d

Table of Contents