Toshiba Satellite L300 Maintenance Manual page 75

3 Diagnostic Programs
Test Result
3.
System will automatically run and display the test result as follows:
Following is the comparison report of the two testing methods mentioned above:
1) Configuration and Running
As to the method used in Mouse test, the user is required to select test items by pressing
Space key and set the parameters artificially, (See 3.3.3 Item's Parameters
Configuration) Then press F8 to start the test. User should configure each parameter in
advance; otherwise the default parameters would be used. Using this method, user is
allowed to select more than one test item at one time.
2) Running the current test item
Satellite L300D,Satellite Pro L300, EQUIUM L300,SATEGO L300 Maintenance Manual
6
Downloaded from LpManual.com Manuals
3.2 Quick Start