Troubleshooting - Toro 41177 Multi-Pro 1250 Operator's Manual

Troubleshooting

Troubleshooting the Engine and Vehicle
Problem
The starter does not crank.
The engine cranks, but will
not start.
Possible Cause
1. The range selector is in a
gear other than Neutral.
2. The electrical
connections are
corroded or loose.
3. A fuse is blown or loose.
4. The battery is
discharged.
5. The safety
interlock system is
malfunctioning.
6. A broken starter or starter
solenoid.
7. Seized internal engine
components.
1. The fuel tank is empty.
2. Dirt, water, or stale fuel
is in the fuel system.
3. Clogged fuel line.
4. The spark plug lead is
disconnected.
5. A spark plug is damaged
or dirty.
6. The kill relay is not
energized.
7. The ignition is broken.
63
Corrective Action
1. Press the brake pedal and
move the range selector
to the Neutral position.
2. Check the electrical
connections for good
contact.
3. Correct or replace fuse.
4. Charge or replace the
battery.
5. Contact your Authorized
Service Dealer.
6. Contact your Authorized
Service Dealer.
7. Contact your Authorized
Service Dealer.
1. Fill with fresh fuel.
2. Drain and ush the fuel
system; add fresh fuel.
3. Clean or replace.
4. Reconnect the spark
plug.
5. Replace the spark plug.
6. Contact your Authorized
Service Dealer.
7. Contact your Authorized
Service Dealer.