Pushing The Machine By Hand - Toro 72211 417XT Wheel Horse Operator's Manual

Pushing the Machine by Hand

Important
Always push the machine by hand. Never
tow the machine because transaxle damage may occur.
To Push the Machine
1. Disengage the power take off (PTO) and turn the
ignition key to off.
2. Move the drive control rod to the push position. This
disengages the drive system and allows the wheels to
turn freely (Fig. 19).
To Operate the Machine
1. Move the drive control rod to the operate position
(Fig. 19).
Note: The machine will not drive unless the drive control
rod is in the operate position.
1
2
Figure 19
1. Operate position
2. Push position
3
M–4566
3. Drive control rod
24