Toro Riding Mower Safety; Sound Pressure; Sound Power; Vibration - Toro 72211 417XT Wheel Horse Operator's Manual

Disengage drive to attachments when transporting or
not in use.
Stop the engine and disengage drive to attachment
– before refuelling;
– before removing the grass catcher;
– before making height adjustment unless adjustment
can be made from the operator's position.
Reduce the throttle setting during engine run-out and,
if the engine is provided with a shut-off valve, turn the
fuel off at the conclusion of mowing.
Maintenance and Storage
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
Never store the equipment with fuel in the tank inside
a building where fumes can reach an open flame or
spark.
Allow the engine to cool before storing in any
enclosure.
To reduce the fire hazard, keep the engine, silencer,
battery compartment and fuel storage area free of
grass, leaves, or excessive grease.
Check the grass catcher frequently for wear or
deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladed machines, take care as rotating one
blade can cause other blades to rotate.
When machine is to be parked, stored or left
unattended, lower the cutting means unless a positive
mechanical lock is used.

Toro Riding Mower Safety

The following list contains safety information specific to
Toro products or other safety information that you must
know that is not included in the CEN standard.
Use only Toro-approved attachments. Warranty may
be voided if used with unapproved attachments.

Sound Pressure

This unit has a maximum sound pressure level at the
operator 's ear of 91 dBA, based on measurements of
identical machines per Directive 98/37/EC.

Sound Power

This unit has a guaranteed sound power level of 105 dBA,
based on measurements of identical machines per
Directive 2000/14/EC.

Vibration

This unit does not exceed a hand/arm vibration level of
2
2.29 m/s , based on measurements of identical machines
per Directive 98/37/EC.
This unit does not exceed a whole body vibration level of
2
0.33 m/s , based on measurements of identical machines
per Directive 98/37/EC.
5