Indicator Control Module - Toro 72211 417XT Wheel Horse Operator's Manual

2. Insert the KeyChoice key into the switch (Fig. 7).
1
Figure 7
1. KeyChoice switch
3. Turn the KeyChoice key.
A red light on the front console (Fig. 8 and 9) turns on,
indicating that the interlock is disabled.
Figure 8
1. Operating-in-reverse light—Model 419XT
1
Figure 9
1. Operating-in-reverse light—Model 417XT
4. Shift into reverse and complete your task.
5. Stop the PTO, which will turn off the red light on the
console, to activate the interlock.
6. Remove the KeyChoice key and put it in a safe place
out of reach of children.

Indicator Control Module

The indicator control module (Fig. 10 and 11) contains
lights for:
Operating in reverse
Power take off (PTO)
Battery
Oil pressure
Hourmeter (LED)
Cruise control (Model 419XT only)
m–4220
Fuel level (Model 419XT only)
5
1
1. Power take off (PTO)
2. Battery
3. Hourmeter
m–6517
1 2
m–6518
1. Power take off (PTO)
2. Cruise control
3. Battery
4. Hourmeter
Following are the conditions when indicator lights will be
on. At other times the lights should be off.
Operating in Reverse
The Operating–in–Reverse light will illuminate whenever
the KeyChoice switch is used to deactivate the
operating-in-reverse interlock. It is a reminder that the
interlock system is deactivated. The light goes out
whenever the power take off (PTO) is disengaged or the
engine is shut off.
20
2 3
4
Figure 10 (Model 417XT)
4. Oil pressure
5. Operating-in-Reverse
3 4 5
Figure 11 (Model 419XT)
5. Fuel level
6. Oil Pressure
7. Operating-in-Reverse
1
m–6518
6 7
m–6517