Recording On Loop 2 - Vox Dynamic Looper Owner's Manual

The recording length will automatically synchronize with
the tempo and time signature. When you stop recording, the
end of the recording will automatically be adjusted to an
exact multiple of the specified tempo and time signature,
allowing you to create phrases of a precise length.
Start REC
Phrase length
If you want to disable the Loop Quantize function, hold
down the TRIGGER/TAP pedal for approximately two
seconds before you record. The METRONOME button will
go dark, and the Loop Quantize function will be disabled.
Initiating recording when you start playing
(Auto Recording Start)
The Auto Recording Start function makes recording begin
the moment you start playing.
1. Press the AUTO REC button to make it light-up.
2. Press the REC/PLAY/OVERDUB pedal.
The LOOP STATUS LED will blink red.
The Auto Recording Start function will turn on, and the
Dynamic Looper will be in record-standby mode.
3. Play your instrument, or vocalize (or play) into your mic.
Recording will begin the moment you start playing.
During recording, the LOOP STATUS LED will light-up
red.
End REC

Recording on Loop 2

Now let's record a phrase on Loop 2.
Note: You can also record on Loop 2 while playing back a
phrase on Loop 1.
1. Select the program that provides the sound that you
want. As desired, you can also adjust the effect
parameters.
) p.18 "Applying an effect to your guitar performance or
) p.37 "Editing a program"
2. Press the STOP pedal and PROGRAM UP pedal
simultaneously, making the Loop 2 current loop LED
light-up.
3. At the desired moment, press the PLAY/REC/OVERDUB
pedal to start recording.
4. When you've played as long as you want the loop to be,
press the PLAY/REC/OVERDUB pedal.
Recording will end, and the loop will switch to playback.
Note: If you're recording at a specified tempo, recording
will end in synchronization with the tempo and the time
signature (the Loop Quantize function).
mic audio"
Creating phrases
21