Optional Accessories; Protecting The Environment - Stanley SCD12 Manual

ENGLISH
unseen areas to determine the proper position of the clutch
collar.
MAXIMUM RECOMMENDED CAPACITIES
Low Range–1
Bits, Metal
6.00 mm
Drilling
Wood, Flat
19.00 mm
Boring
Hole Saws 19.00 mm
Maintenance
Your STANLEY power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
WARNING: To reduce the risk of serious
personal injury, place the forward/reverse
button in the lock-off position or turn tool
off and disconnect battery pack before
making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
The charger and battery pack are not serviceable. There are
no serviceable parts inside.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust
mask when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken the
materials used in these parts. Use a cloth
dampened only with water and mild soap.
Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
12
CHARGER CLEANING INSTRUCTIONS
High Range–2
3.00 mm
12.00 mm
16.00 mm
Charger Cleaning Instructions

Optional Accessories

Consult your dealer for further information on the appropriate
accessories.

Protecting the Environment

Should you find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not dispose
of it with household waste. Make this product available for
separate collection.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
WARNING: Shock hazard. Disconnect the
charger from the AC outlet before cleaning. Dirt
and grease may be removed from the exterior
of the charger using a cloth or soft non-metallic
brush. Do not use water or any cleaning
solutions.
WARNING: Shock hazard. Disconnect the
charger from the AC outlet before cleaning. Dirt
and grease may be removed from the exterior
of the charger using a cloth or soft non-metallic
brush. Do not use water or any cleaning
solutions.
WARNING: Since accessories, other than those
offered by STANLEY, have not been tested
with this product, use of such accessories with
this tool could be hazardous. To reduce the
risk of injury, only STANLEY, recommended
accessories should be used with this product.
Separate collection. This product must not be
disposed of with normal household waste.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces
the demand for raw materials.