Maintenance And Spare Parts - Omron RX3 Instruction Manual

8 Maintenance and spare parts

Cleaning instruction
• Use a soft, slightly moistened
cloth to clean the OMRON RX3
Plus and the wrist cuff.
Caution! Do not use petrol,
thinners or similar solvents!
Caution! Do not wash the wrist
cuff!
• Do not carry out repairs of any
kind yourself. If a defect occurs
consult your OMRON retail outlet
or distributor as mentioned on the
packaging.
Calibration
• It is recommended to have the
OMRON RX3 Plus inspected
every two years to ensure correct
function and accuracy. Consult
your OMRON retail outlet or
OMRON distributor as mentioned
on the packaging.
Replace batteries
• Remove the battery out of the
RX3 Plus
battery compartment and insert
two new identical 1.5V alkaline
batteries type AAA.
Spare parts
• Due to high company quality
standards, OMRON considers the
main unit as a non-serviceable
part because the need for proper
calibration after replacement of
high tech components.
• If the cuff needs to be replaced
have this done by an authorised
expert. Consult your OMRON
retailer or OMRON distributor as
mentioned on the packaging.
Attention! Disposal of batteries and
the OMRON RX3 Plus should be
carried out in accord-
ance with the national
regulations for the
disposal of electronic
products.
English
14