5 Error: causes and rectifications
Indication
Error
Correct
reading
not
possible
Low
voltage
Display empty
6 Maintenance and spare parts
• Use a soft, slightly moistened cloth to
clean the OMRON MX2 Basic.
Caution! Do not use petrol, thinners or
similar solvents!
• Use a soft, moistened cloth and soap to
clean the cuff.
Caution! Do not wash the cuff!
Caution! Do not use petrol, thinners or
similar solvents!
• Do not carry out repairs of any kind
yourself. If a defect occurs consult your
Cause
Rectification
Cuff pressure
Wait for at least three minutes to repeat
low
measurement.
Inflate the cuff 40 mmHg higher than
Movement
previous value.
Follow instructions, repeat
Very weak
measurement.
artery pulse
Cuff pressure
Wait for at least three minutes to repeat
too high
measurement.
Inflate the cuff 30 mmHg lower than
previous value.
Follow instructions, repeat
measurement.
Batteries weak/ Fit four new identical 1.5V
exhausted
batteries type AA
OMRON retail outlet or distributor as
mentioned on the packaging.
Calibration
• It is recommended to have the OMRON
MX2 Basic inspected every two years to
ensure correct function and accuracy.
Consult your OMRON retail outlet or
OMRON distributor as mentioned on the
packaging.
Replace batteries
• Remove the battery out of the battery
MX2 Basic
English
7