Maintenance And Spare Parts; Technical Data - Omron M7 Instruction Manual

Digital automatic blood pressure monitor
Hide thumbs Also See for M7:
Table of Contents

Advertisement

8 Maintenance and spare parts

Cleaning instruction
• Use a soft, dry cloth to wipe stains from the
OMRON M7.
• Use a soft, slightly moistened cloth and soap to
clean main unit and cuff of the OMRON M7.
Caution! Do not use petrol, thinners or similar
solvents!
Caution! Do not wash the cuff!
• Do not carry out repairs of any kind yourself. If a
defect occurs, consult your OMRON retail outlet or
distributor as mentioned on the packaging.
Calibration
• It is recommended to have the OMRON M7
inspected every two years to ensure correct function
and accuracy. Consult your OMRON retail outlet or
OMRON distributor as mentioned on the packaging.

9 Technical data

Product name
Model
Display
Measurement range
Accuracy
Inflation
Deflation
Pressure detection
Memory
Power supply
Battery life
Operating temperature / Humidity
Operating environment
Storage temperature / Humidity
Weight
Outer dimensions
Accessories
Optional parts
Note
= Type B
Manufacturer
EU-representative
This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive). This blood pressure monitor is designed
according to the European standard EN1060, Non-invasive sphygmomanometers Part 1: General Requirements and Part 3:
Supplementary requirements for electromechanical blood pressure measuring systems.
14
OMRON Digital Automatic Blood Pressure Monitor
M7
Digital LCD
Pressure: 0 - 299 mmHg / Pulse: 40 - 180/minute
Pressure: ± 3 mmHg / Pulse: ± 5% of display reading
Automatic inflation (Fuzzy control)
Automatic air release by controlled air release valve
Electrostatic capacity pressure sensor
90 Measurements
4 x 1.5V batteries type AA / AC adapter (optional part)
New batteries will last for approximately 300 measurements
+10°C to +40°C / 30% to max. 85% relative humidity
Free from excessive vibrations, shocks, magnetic fields, electrical noise, etc.
-20°C to +60°C /10% to max. 95% relative humidity
Main unit approximately 400 g, excluding batteries, cuff approximately 130 g
Approximately 165 mm (W) x73 mm (H) x 110 mm (D), cuff approximately
150 mm (W) x 582 mm (L) arm circumference 22 cm to 42 cm
Cuff model HEM-CUFF-P, hard case, instruction manual, guarantee card, blood pressure pass
AC adapter, extended tube
Subject to technical modification without prior notice
0197
OMRON HEALTHCARE Co., Ltd.
24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto, 615-0084 Japan
OMRON HEALTHCARE EUROPE B.V., Kruisweg 577, NL-2132 NA Hoofddorp
Replace cuff
• Remove the air plug to re-use it with a new cuff.
Replace batteries
• Remove the battery out of the battery
compartment and insert four new identical 1.5V
batteries type AA.
Spare parts
• Due to high company quality standards, OMRON
considers the main unit as a non-serviceable part
because of the need for proper calibration after
replacement of high tech components.
Attention! Disposal of batteries and the
OMRON M7 should be carried out in
accordance with the national regulations
for the disposal of electronic products.
M7
English

Advertisement

Table of Contents
loading

Table of Contents