Appendix B: Configuring Cs1000 Server For B179 - Avaya B179 SIP Installation And Administration Manual

Avaya B179 SIP Conference Phone

APPENDIX B: CONFIGURING CS1000 SERVER FOR B179

Before you begin
Install and configure the CS1000 call server, signaling server, and nodes.
Obtain the administration credentials of the CS1000 call server.
About this task
Using CS1000 Element Manager, configure the following components of the CS1000 Server:
• SIP Line service
• SIP Line D-Channel
• Application Module Link (AML)
• Value Added Server (VAS)
• Zone for SIP phones
• SIP Line Route Data Block (RDB)
• SIP Line Virtual Trunk
• Media Gateway Controller
• SIP Line telephone corresponding to the B179 SIP Conference Phone
Procedure
1. Open Element Manager.
a. Log in to the web UI of Avaya Unified Communications Management (UCM) web interface by using
the IP address of the CS1000 call server. The UCM page is displayed.
Installation and Administration Guide
70