InFocus IN5542 User Manual page 52

3. Management with Web browser software
3.8.4 COMMUNICATION GROUP / COMMUNICATION ID
When projectors are controlled in a DAISY CHAIN, set the COMMUNICATION
GROUP and COMMUNICATION ID for each projector separately in order to
control a projector individually or some of the projectors simultaneously.
Use the COMMUNICATION GROUP menu and COMMUNICATION ID
menu to set up them. (Operating Guide - OPTION menu - SERVICE –
COMMUNICATION – COMMUNICATION GROUP / COMMUNICATION ID)
NOTE
• The COMMUNICATION GROUP is set to A, and the
COMMUNICATION ID is set to the 1, as the default settings.
• To control some projectors individually, do not set up the same
COMMUNICATION ID to these projectors.
Alternatively, setting up the same COMMUNICATION ID to two or more
projectors intentionally realizes simultaneous control for these projectors, like
the coincident control with the COMMUNICATON GROUP.
3.8.5 Command for Daisy Chain control
For the command control of the DAISY CHAIN function, see the Technical
Operating Guide. (Operating Guide - Technical – Daisy Chain
Communication)
52