InFocus IN5542 User Manual page 38

3. Management with Web browser software
3.4 Event Scheduling (continued)
Date/Time Settings (23)
The Date/Time setting can be adjusted via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter "http://192.168.1.10/" into the address bar of the web browser. Enter the
Administrator ID and Password and click [Logon].
2) Click the [Date/Time Settings] on the main menu and configure each item.
Refer to the item 3.1.8 Data/Time Settings for further information.
3) Click the [Apply] button to save the settings.
NOTE
• A Network Restart is required after the Daylight Savings Time or
SNTP configuration settings have been changed.
• If the clock loses time even when the date and time have been set correctly,
the battery for the built in clock may be dead. Replace the battery by following
the "Internal clock battery" section of the User's Manual (concise).
• The internal clock's time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
38