Battery Board (select models only)
Description
Battery board (with cable)
Before removing the battery board, follow these steps:
1.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
3.
Remove the battery (see
4.
Remove the optical drive (see
5.
Remove the base enclosure and top cover (see
Remove the battery board:
1.
Turn the computer, with the front edge toward you.
2.
Remove the two screws (1).
3.
Lift the battery board (2) to remove it.
Reverse this procedure to install the battery board.
Optical drive connector
NOTE:
The optical drive connector and cable are included in the optical drive spare part kit. (See the Optical
drive removal for more information for the spare part kit information.)
Battery on page
30).
Optical drive on page
Base enclosure on page
31).
34).
Component replacement procedures
Spare part number
763710-001
47