Battery Board (Select Models Only); Optical Drive Connector - HP ENVY 17 Maintenance And Service Manual

Hp envy notebook pc maintenance and service guide
Hide thumbs Also See for ENVY 17:
Table of Contents

Advertisement

Reverse this procedure to install the TouchPad button board.

Battery Board (select models only)

Description
Battery board for HP ENVY 17 Notebook PC
The battery board is for select HP ENVY 17 Notebook PC computer models.
Before removing the battery board, follow these steps:
1.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
3.
Remove the battery (see
4.
Remove the optical drive (see
5.
Remove the base enclosure and top cover (see
Remove the battery board:
1.
Turn the computer, with the front edge toward you.
2.
Remove the two Phillips screws (1).
3.
Lift the battery board (2) to remove it.
Reverse this procedure to install the battery board.

Optical drive connector

NOTE:
The optical drive connector and cable are included in the optical drive spare part kit. (See
Optical drive on page 43
Before removing the optical drive connector board, follow these steps:
62
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
42).
Optical drive on page
for the spare part kit information.)
43).
Base enclosure on page
Spare part number
763710-001
46).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envy m7Envy 15

Table of Contents