Using The Memory Function; Averaging Function - Omron ELITE 7300IT Instruction Manual

USING THE MEMORY FUNCTION

Every time you complete a measurement the monitor stores the blood
pressure and pulse rate in the memory.
The monitor automatically stores up to 84 sets of measurement values
(blood pressure and pulse rate). When 84 sets of measurement values are
stored, the oldest record is deleted to save the most recent values.
Measurements taken using the guest mode are not stored in the memory.

AVERAGING FUNCTION

The monitor calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the last
reading.
NOTES: • If two sets of measurement values are stored in the memory
for the 10 minutes period, the average is based on the two
sets of measurement values.
• If one set of measurement values is stored, this is displayed as
the average.
31