Registering A Password; Resetting The Lamp Counter - Canon SX6 User Manual

Registering a Password

[Register password]
DIGITAL PC
DIGITAL VIDEO
You can register a password that you need to
enter when turning on the projector.
Other settings
Register password
Press the [OK] button to display the password
entry screen.
Enter a 4-digit password from the left. You can
enter a value 1, 2, 3, and 4 by pressing [ ], [ ],
[<], and [>], respectively. Once you enter a
value for all four digits, the password is regis-
tered automatically.
Press the [MENU] button without
entering a password if you want to
cancel registering the password.
102
ANALOG PC
COMP./SCART VIDEO/S-VIDEO
System settings

Resetting the Lamp Counter

[Lamp counter]
DIGITAL PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can reset the lamp counter that indicates the
timing to replace the projector when you replace
it.
Other settings
Lamp counter
If the time of use is less than 1,000 hours
(1,840 hours for SX60)
If the time of use is 1,000 to 1,400 hours
(1,840 to 2,500 hours for SX60)
If the time of use is 1,400 hours or longer
(2,500 hours or longer for SX60)
If you replace the lamp
Resets the lamp counter.
OK
Cancels resetting the lamp counter.
Cancel
ANALOG PC
System settings