Projecting A Video Image From An Av Equipment - Canon SX6 User Manual

Projecting a Video Image from an AV Equipment

You can project a video image with the steps similar to those for projecting an image from a
computer.
This section provides information specific to the projection from an AV equipment.
For more detailed information for each step, refer to the corresponding page.
1
Turn on the projector.
Connect the power cord and turn on the projector (P35).
Adjust the height of the projecting image (P38).
Select a display language for the first time (P36).
2
Prepare the AV equipment.
Turn on the AV equipment and start playing the video image.
For digital content video image:
3
Press the button to switch the input signal.
Select [DIGITAL VIDEO] as the input signal.
4
Press the button.
Adjust the input signal, focusing, keystone distortion, and so on automatically
using the auto setup function.
5
Press the button.
Select an appropriate image mode depending on the projecting image.
Select an appropriate screen mode from the [Aspect] menu.
Stopping projection...
Turn off the projector.
Turn off the projector and remove the power cord from the AC outlet.
P35*
P60
P53*
* Those steps are same as those for projecting the computer screen.
P61
P64, 78, 79
P50*
59