Canon SX6 User Manual page 25

Indicators on the Top Control
Top Control
(1)
(1) POWER indicator (P35, 53, 96)
Indicates the projector status.
Red:
Flashing red:
Green:
Flashing green:
Blink between red and green: The projector is under the power management
(2) WARNING lamp (P112)
Flashes red when a problem has been detected on the projector.
(3) LED illumination lamp (P100)
Indicate the projector status with 3 blue LEDs.
Blinking from the left:
Blinking from the right:
Middle LED flashing slowly:
Left and right LEDs flashing slowly:
24
(2) (3)
The projector can be turned on.
The projector is being turned off (the lamp is being
cooled).
The projector is on.
The projector is being turned on.
mode.
The projector is being turning on.
The projector is being turned off.
The image is blackened out (NO SHOW).
The image is stopped (FREEZE).