Turning Off The Projector - Canon SX6 User Manual

Hide thumbs Also See for SX6:
Table of Contents

Advertisement

Turning Off the Projector

You may shorten the lamp life if turning off the projector while its lamp is still in an unstable
state shortly after turning on the projector. Wait at least 5 minutes before turning off the pro-
jector.
Wait at least 5 minutes before turning on the projector when you turn off the projector. It may
shorten the lamp life if you turn on the projector immediately after turning it off.
Using the projector for a long time may shorten the life of the lamp and internal optical com-
ponents.
When the projector is turned off, it starts cooling the lamp. You cannot turn it on during the
process.
1
Press the [POWER] button.
A confirmation message appears on the screen.
To continue projection, wait until the confirmation message disappears (approximately
4 seconds) or press a button other than the [POWER] button.
2
Press the [POWER] button again while the confirmation message is displayed.
The lamp goes off, the [POWER] indicator starts flashing in red, and it starts cooling
the lamp.
3
Remove the power cord from the AC outlet.
It continues to cool down the lamp even after removing the power cord.
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx60X600

Table of Contents