Setting Display Status From The Display Settings Menu; Selecting A Screen Mode (1); Selecting A Screen Mode (2) - Canon SX6 User Manual

Setting Display Status from the Display Settings
Menu

Selecting a Screen Mode (1)

[Aspect]
DIGITAL PC
You can adjust the aspect ratio of the image pro-
jected on the screen.
Display settings
Projects a full computer screen fully
Full screen
on the screen.
Projects an input signal image in the
Auto
maximum size with the aspect ratio
unchanged.
Projects a computer screen at 16:9
Wide Screen
aspect ratio with its width matching
to the width of the projecting area.
Projects a computer screen in its
True size
original size (no enlargement/reduc-
tion).
Press the [MENU] button when you finish.
Circles may become out of round
depending on the display resolution of
the computer
selected.
The upper, lower, left, and/or right por-
tions of a projected image may be
missing depending on the selected
display mode.
You cannot select [True size] depend-
ing on the input signal.
78
ANALOG PC
Aspect
if Full screen

Selecting a Screen Mode (2)

[Aspect]
DIGITAL VIDEO
You can adjust the aspect ratio of the image pro-
jected on the screen.
Auto
Full screen
Wide Screen
Press the [MENU] button when you finish.
The upper, lower, left, and/or right por-
tions of a projected video image may
be missing
selected display mode.
is
COMP.
Display settings
Aspect
Switches between [Full screen] and
[Wide Screen] automatically
accordance with the video image
(COMPONENT input only).
Projects a video image with aspect
ratio of 4:3.
Projects a video image with aspect
ratio of 16:9.
depending
in
on the