Beam ISATDOCK PRO User Manual page 20

5) Connect RJ11/POTS Interface
Any standard analogue POTS Telephone (POTS =
Plain Old Telephone Service) is supported by the
IsatDock PRO. It supplies power to the analogue
phone as well as ring, dial and busy tones.
Route the telephone cabling (up to 600m) from
the analogue phone.
Mount the analogue phone if required, and plug
the RJ11 cable into the IsatDock PRO RJ11 port.
RJ11 port
See section 4 on page 19
20
6) USB Port Connection
IsatDock PRO has a micro USB Data Port for
programming interface to enable upgrading of
the Docking station firmware.
USB Data Port
See section 4 on page 19
NOTE
Data services scheduled to be available Q1 2011.