Table of Contents
Advertisement
Names and stereo links are available from all
Qu system dSNAKE ports:
dSNAKE port – If it is not being used for
digital snake connection to a remote rack.
AR2412 Monitor port,
AB168 Expander port
The ME-U hub interfaces audio from a digital
network to multiple ME-1 mixers. Inputs can
be sourced from dSNAKE, ACE, Dante or
MADI.
Input Option card –Availability of remote
names and links depends on the option card
fitted and mixer connected:
ME-D – For connection to Qu dSNAKE.
ACE –The ME-U hub can get names and
stereo links from GLD or iLive via ACE only if
a second Cat5 cable links its Network port to
the mixer Network port.
Note
If you link the network make sure the
ME-U hub and mixer have compatible IP
addresses.
Dante option fitted to GLD or iLive –
The ME-U hub can get names and stereo
links from the mixer if a second Cat5 cable
links its Network port to the mixer Network
port.
Dante from third party source – Audio
only.
MADI option fitted to GLD or iLive –
The ME-U hub can get names and stereo
links from the mixer if a Cat5 cable links its
Network port to the mixer Network port.
MADI from third party source – Audio
only.
Note
ME-U supports 48kHz MADI only.
Local at ME-U
Names and stereo linking can be
assigned locally at the hub to feed all
connected ME-1 mixers.
User Guide – AP8997 iss.3
Other Sources
ME-1 can be connected directly to:
Aviom
®
A-Net 16 – Any third party
system providing an Aviom
channels) with stereo link capability. Names
are not available.
Note
Power over the Cat5 cable (PoE) is not
available if you are connecting via an Aviom
hub. Use the power unit provided with the
ME-1 mixer.
26
®
output (16
®
ALLEN&HEATH
Hide quick links:
Advertisement
Table of Contents
