Recalling A Preset From Usb; Storing A Preset To A Key; Storing A Preset To Usb; Editing A Preset - ALLEN & HEATH ME-1 User Manual

7.21 Recalling a Preset from USB

Hold the Recall key.
If a USB key is plugged in then a list of
presets found on the key will be displayed:
Recall:
Or press a key
While holding Recall turn the Rotary to scroll
through and highlight the preset to recall.
Press the Rotary to select the preset. Press
again to confirm the recall.
Release the Recall key to exit.

7.22 Storing a Preset to a key

Hold Shift and press the Recall key to enter
Store mode.
Select keys light to show preset status:
Shift
Store Preset
Recall
Short flash
1 2
Off – Key set for or recall only.
On – Last preset stored.
Short flash – Preset available for store.
Press a Select key. The screen displays the
available preset number and name. The key
flashes to show it is selected ready to store.
Store:
Press again to store
SONG4
Press the key again to overwrite the preset
with the current settings.
Once stored the ME-1 exits Store mode.
User Guide – AP8997 iss.3
START1
START2
TEST
Press and hold
On Off
3 4
Preset4
Edit

7.23 Storing a Preset to USB

Hold Shift and press the Recall key to enter
Store mode.
If a USB key is plugged in then the 'To USB'
item will be highlighted on the screen:
Store:
Or press a key
Press the Rotary to select the USB key. Press
the Rotary again to store a preset with the
name displayed to USB.
Select the 'Edit Name' item if you wish to
change the name before storing the preset to
USB.
Note If the name is blank then the preset will
be stored to USB key with the default
'PRESET' name.
Once stored the ME-1 exits Store mode.

7.24 Editing a Preset

While in Store mode press the Select key for
the preset you wish to edit.
Press the Rotary to open the
Name with up to 8 characters

Clear the name

Clear the preset contents and name

To name the preset – Use the Rotary to
scroll to the character to edit. Press it again to
select it and scroll through the available
characters. Press again and scroll to another
character.
Store:
Clear Preset
S T
Available characters for preset naming are:
0-9, A_Z, space
21
To USB
Edit screen:
Preset4
NG4
ALLEN&HEATH