Working With Configurations - ALLEN & HEATH ME-1 User Manual

8.11 Working with Configurations

The ME-1 Configuration stores the current
settings, all assignments and all presets. Hold
Shift and press the Group key:
Dimmer
About
Key Setup
System Setup
Press Group to exit
Select System Setup:
Config:
Unit:
Mic Mute:
Reset Source List
Firmware: V1.11r1485
Select the Config screen to change the name
of the configuration, and to export or import a
configuration file via USB key.
Name
Export
Import
You can apply a Config name with up to 8
characters to displays on the
the screensaver and also in Standby mode.
This also becomes the name of the config file
transferred via USB key.
Name:
EL
Select the X to clear the current name.
Available characters are:
0-9, A-Z, space
Press the Master key to return to the Config
screen.
User Guide – AP8997 iss.3
MATT
MM4
MATT
No USB key
No USB key
Home screen,
MATT
Exporting the Config file – Plug in a USB
key. Check the key is recognised.
Name
Export
Import
The ME-1 will automatically create a ME1CFG
folder on the USB key if one does not already
exist.
Edit the Name if you want to change it. Select
Export and OK on the confirmation screen.
Note The export will overwrite any existing
config file with the same name on the USB
key.
Importing a Config file - Plug in a USB key
with the required file in the correct folder.
Check the key is recognised.
Import:
Scroll through the list of Config files found on
the USB key. Press the rotary to select the file
and select OK on the confirmation screen.
Note Importing a Config overwrites all ME-1
settings and presets. If you wish to save your
settings first export the current config to USB.
Working with Configurations – You can set
up one ME-1 mixer and store all its settings
and presets as a Config file, and export this
to USB key. Use this to archive your setup on
computer, or to copy to other ME-1 mixers as
a starting point for editing. This provides a
very quick way to set up multiple mixers for
personal monitoring.
Note You can also store and recall individual
presets directly to or from the USB key. This
provides a quick way of copying settings
between mixers without overwriting all their
presets and current assignments.
29
MATT
To USB
From USB
ME
DEMO
MATT
ALLEN&HEATH