Reference; Working With Usb Keys; To Reset The Me-1; To Reset Auto Names And Links - ALLEN & HEATH ME-1 User Manual

Reference

9.

9.1 Working with USB keys

We recommend that you start with a
reformatted USB key.
Check the key - Plug in and check that the
key is recognised by the ME-1. To do this
press the Recall key. The screen should
display a list of presets already on the key or
the following message if blank:
Recall:
No USB Presets
+Press a key
Folders - ME-1 automatically creates folders
in the root directory of the USB key when it is
plugged in:
ME1CFG For configuration files
ME1PST For presets
Files - Config and preset files have the same
.ME1 extension and must therefore be placed
in their correct folders if you copy them
between computer and USB key.
Files can be identified by their size:
Preset = 4KB
Config = 72KB
The files are not time stamped as ME-1 does
not have a built-in clock.
File names – ME-1 uses 8.3 short file names.
It will not recognise file names longer than 8
characters. It will convert lower case
characters to upper case.
ABCD5678.ME1
Therefore if you wish to rename files on your
computer before transferring them to ME-1
mixers make sure the names are no longer
than 8 characters and comprise the following
character set:
0-9, A-Z, space
User Guide – AP8997 iss.3

9.2 To Reset the ME-1

To perform a hard reset:
Hold down the Shift + Recall + Master keys
and power up the mixer. Release the keys
once the following screen appears. Confirm
to reset the mixer.
Reset System?
This will clear all!
Resetting the ME-1:
Assigns all keys to Auto Mode

Assigns all keys for preset Store/Recall

Assigns all key names to default

All levels off, pans mid, mutes off

All presets blank (cleared)

Config name = DEFAULT

Unit name = default (MAC address)


9.3 To Reset auto Names and Links

Names and stereo links received from the
source can be cleared. To do this:
Hold down Shift and Group to enter the
Menu screen. Scroll and select System
Setup. Scroll and select Reset Source List.
Config:
Unit:
Mic Mute:
Reset Source List
Firmware: V1.11r1485
Note If you are connecting ME-1 directly to a
source that does not have name and link
data, you can clear any previously received
names and stereo links using this function.
31
OK
Cancel
MATT
MM4
ALLEN&HEATH