Samsung NY58J9850WS User Manual page 53

Problem Cause
Oven light (lamp) The oven door lock is
will not turn on. turned on.
The Sabbath function has
been activated.
Loose or burned-out bulb.
The switch operating the
oven light needs to be
replaced.
Oven smokes Meat or food not
excessively during properly prepared before
broiling. broiling.
Improperly positioned
top oven rack.
The controls are not
being set properly.
Greasy buildup on oven
surfaces.
Action
The display will show the
Lock icon. Hold the oven door
open and press the START/SET
button for 3 seconds. The oven
will beep and the Lock icon
will turn off.
SAb and the time of day
will show in the display. All
other controls and signals
will be deactivated. To cancel
the Sabbath function and
reactivate the light switch and
other controls, press and hold
the Bake and Touch to Wake-
Up buttons simultaneously for
3 seconds.
See page 49.
Call for a qualified service
technician.
Cut away excess fat and/or
fatty edges that may curl.
See the broiling guide on page
26.
See page 23.
Regular cleaning is necessary
when broiling frequently.
Problem Cause
Cooking is The fan automatically
finished, but the runs for a certain amount
cooling fan is still of time to ventilate the
running. inside of the oven.
Oven will not self- The oven door lock is
clean. turned on.
The Smart Divider is
installed in the oven.
The warming drawer is
being used.
The oven is too hot.
The self-cleaning oven
controls are not properly
set.
A surface burner is on.
Action
This is not a product
malfunction. The fan is
designed to run automatically
for a period of time to cool
down the oven.
The display will show the
Lock icon. Hold the oven door
open and press the START/SET
button for 3 seconds. The oven
will beep and the Lock icon
will turn off.
Self-clean will not operate
with the Smart Divider
installed. Remove it from the
oven.
Self-clean will not operate
when the warming drawer is
on.
Let the oven cool down, and
then reset the controls. The
self-clean cycle will not lock
the oven door if the oven
temperature is too hot. The
door must lock before the self-
clean cycle can start.
Reset the self-cleaning oven
controls. (See page 46.)
Turn off the surface burner.
Self-clean will not operate if a
surface burner is on.
English 53