Locking/Unlocking The Telephone; Setting The Ringer; Setting The Handset; Key Confirmation Tone - Siemens Euroset 5010 Instructions Manual

Setting the ringer

frequency
The frequency (speed) of the
ringer can be set to one of
3 levels (default setting:
level 3).
c?6
select function.
1 3
... 1: Slow, 2:
Medium, 3: Fast
?a
Press Set key and
replace handset.
To adjust while the
telephone is ringing:
Press the hash key
before lifting the handset.
The frequency changes each
time you press the key (max.
3 levels). The last frequency
set is saved.

Setting the handset

volume
The handset volume can be
set to one of two levels
(default setting: level 1).
c?9
select function.
1 2
/ 1: Quiet, 2: Loud.
?a
Press Set key and
replace handset.
Activating/deactivating

key confirmation tone

A "confirmation tone" can be
activated to provide an audi-
ble acknowledgement that
the telephone has detected
each individual key press. You
can activate and deactivate
this confirmation tone:
c?111
Lift handset,
select function.
0 1
/ 0: Deactivate, 1:
Activate.
?a
Press Set key and
replace handset.
Activating/deactivating
the waiting melody
c?110
Lift handset,
select function.
0 1
/ 0: Deactivate,
1: Activate.
Lift handset,
#
Lift handset,
4
EN
?a
Blocking/releasing
number groups
You can block up to 3 number
groups. This means that num-
bers beginning with the
blocked digits cannot then be
dialled.
c?86
1 3
...
o
?a
Releasing
c?86
1 3
...
?a
Locking/unlocking the
telephone
When the telephone is locked,
except for a saved emergency
number (see "Saving/deleting
an emergency number") no
numbers can be dialled;
incoming calls can be
answered.
c?8
1 0
/
?a
Temporarily suspending the
lock for 1 call
c?82?
o
a
After replacing the handset
the lock is active again.
Press Set key and
replace handset.
Lift handset,
select function.
Enter 1st, 2nd or
3rd blocking posi-
tion.
Enter beginning of
number to be
blocked (max. 3
digits).
Press Set key and
replace handset.
Lift handset,
select function.
Enter position to
be released.
Press Set key and
replace handset.
Lift handset,
select function.
1: Lock, 0: Unlock.
Press Set key and
replace handset.
Lift handset,
select function.
Dial number.
Replace handset
after the call.