Using Counterweights - Toro 74534TE GrandStand Operator's Manual

Position B
Use this position when bagging (Figure 31).
Figure 31
Position C
This is the full, open position (Figure 32). The suggested use
for this position is as follows:
•
In tall, dense grass mowing conditions
•
In wet conditions
•
Lowers the engine-power consumption
•
Allows increased ground speed in heavy conditions
Figure 32

Using Counterweights

•
Weights are installed to improve handling, balance and
improve performance.
•
Weights can be added or removed to create optimized
performance under different mowing conditions and for
operator preference.
•
It is recommended that weights be added or removed one
at a time until the desired handing and balance is achieved.
Note: Contact an Authorized Service Dealer to order a
Weight Kit.
WARNING
Excessive weight changes can effect handling and
operation of the machine. This could cause serious
injury to you or bystanders.
G012678
Make weight changes in small increments only.
Evaluate the mower after each weight change to
ensure the machine can be operated safely.
G012679
28