Introduction - Toro 74534TE GrandStand Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
This product complies with all relevant European directives;
for details please see the separate product specific Declaration
of Conformity (DOC) sheet.
This spark ignition system complies with Canadian ICES-002.
Important: This engine is not equipped with a spark
arrester muffler. It is a violation of California Public
Resource Code Section 4442 to use or operate the engine
on any forest-covered, brush-covered, or grass-covered
land. Other states or federal areas may have similar laws.

Introduction

This rotary-blade, riding lawn mower is intended to
be used by professional, hired operators or residential
homeowners. It is designed primarily for cutting grass
on well-maintained lawns on residential or commercial
properties. It is not designed for cutting brush or for
agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1 identifies the location of the
model and serial numbers on the product. Write the numbers
in the space provided.
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
1. Location of the model and serial numbers
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual identifies potential hazards and has safety
messages identified by the following words:
•
Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.
•
Warning signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
•
Caution signals a hazard that may cause minor or
moderate injury if you do not follow the recommended
precautions.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
1
g020527
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved