Changing The Engine Oil And Filter - Toro 74710 TimeCutter SS 3225 Operator's Manual

A
C
F
G
I J
Figure 31
Changing the Engine Oil and
Filter
Service Interval: After the first 5 hours
Every 100 hours (change it more often under a heavy
load or in high temperatures).
Every 100 hours
Note: Change the engine-oil filter more frequently when the
operating conditions are extremely dusty or sandy.
1. Park the machine, so that the right side is slightly
lower than the left side, to ensure that the oil drains
completely.
2. Disengage the blade-control switch (PTO).
3. Stop the engine, wait for all moving parts to stop, and
remove the key before leaving the operating position.
B
D
E
H
K
4. Drain the oil from the engine.
A
C
E
G
G029368
5. Remove the engine-oil filter.
Note: Ensure the oil-filter gasket touches the engine,
and then turn the filter an extra 3/4 turn.
28
B
D
F
H
Figure 32
g029369